| Angle |
-
<angle value> 45° and 90°
-
1-90
-
2-45
- Sets angle between elbow branches.
|
| Box | Depth Box | Length
Box | Width |
Positive <numeric value>
- Sets dimension of sides of elbow box at the juncture where both branches meet.
|
| Branch 1 | Length |
Positive <numeric value>
- Sets length of branch of elbow connection at End1
|
| Branch 2 | Length |
Positive <numeric value>
- Sets length of branch of elbow connection at End2
|
| Branch 1 | Outer Diameter |
Positive <numeric value>
- Sets outside diameter of branch of elbow connection at End1
|
| Branch 2 | Outer Diameter |
Positive <numeric value>
- Sets outside diameter of branch of elbow connection at End2
|
| Connection 1 | Length (L1) |
Positive <numeric value>
- Sets the straight length of connection at End1.
|
| Connection 2 | Length (L2) |
Positive <numeric value>
- Sets the straight length of connection at End2.
|
| Connection | End Type |
fl -<numeric value>
- Sets and sizes end with a flange connection.
m -<numeric value>
- Sets and sizes end with a male connection.
fe -<numeric value>
- Sets and sizes end with a female connection.
Separate End Type entries for each End Spec with a semi colon. Example: ce-0.2;fe-.03 creates a compression at End1 with size 0.2, and a female connection at End2 with a clearance of 0.3.
|
| Horizontal Offset |
Positive <numeric value>
- Sets offset to connection at End2 farther from the center on the box side along the width.
|
| Inlet | Outer Diameter |
Positive <numeric value>
- Sets outside diameter of main pipe (End1).
|
| Nut Diameter |
Positive <numeric value>
- Sets the diameter of the nut in compression fittings.
|
| Nut Length |
Positive <numeric value>
- Sets the length of the nut in compression fittings.
|
| Outlet | Outer Diameter |
Positive <numeric value>
- Sets outside diameter of branch (End2).
|
| Radius |
Positive <numeric value>
- Sets center line radius of arc formed by branches of compression elbow.
|
| Tube Diameter |
Positive <numeric value>
- Sets diameter of both elbow branches of Extruded Elbow, effecting D1 and D2.
|
| Tag |
<alpha-numeric characters>
- Sets tag value visible in output of drawing composition in dynamic view. Separate tag strings with a semi colon
|
| Vertical Offset |
Positive <numeric value>
- Sets offset to connection at End1 farther from the center on the box side along the depth.
|
